Gear oil СLP-100

loading
loading
loading
loading
loading
loading

Choose weight

Gear oil CLP-100 is recommended for use in industrial gearboxes (metal cutting and woodworking machines, hammers, presses, foundry and moulding machines, winches, rolling mills, bridge cranes, conveyors, elevators, lifts, rotary cement kilns, paper-cardboard machines, and textile and spinning machines), metallurgy (in the steel industry, in the circulating lubrication systems of rolling mills drives), mines and quarries (in closed gears, open gears, sliding knots, ropes) drives high (high-speed rotating equipment, turbines, centrifugal compressors).

Specifications: TU U 23.2-23640044-005: 2010, DIN 51517-III CLP, ISO 100 VG

Gear oil CLP-100 is recommended for use in industrial gearboxes (metal cutting and woodworking machines, hammers, presses, foundry and moulding machines, winches, rolling mills, bridge cranes, conveyors, elevators, lifts, rotary cement kilns, paper-cardboard machines, and textile and spinning machines), metallurgy (in the steel industry, in the circulating lubrication systems of rolling mills drives), mines and quarries (in closed gears, open gears, sliding knots, ropes) drives high (high-speed rotating equipment, turbines, centrifugal compressors).

Specifications: TU U 23.2-23640044-005: 2010, DIN 51517-III CLP, ISO 100 VG

Physicochemical characteristics

 

TU U 23.2-23640044-005: 2010, DIN 51517-III CLP, ISO 100 VG

Index

Norm

Kinematic viscosity at 40°C, mm2/s

 

90-110

 

Viscosity Index, not less than

90

Acid number, mg KOH/g, not less than

1,3

Flash Point in the open crucible, ºC, not lower than

205

Pour Point, ºC, not above

-25

 

 

TU U 23.2-23640044-005: 2010, DIN 51517-III CLP, ISO 100 VG

Index

Norm

Kinematic viscosity at 40°C, mm2/s

 

90-110

 

Viscosity Index, not less than

90

Acid number, mg KOH/g, not less than

1,3

Flash Point in the open crucible, ºC, not lower than

205

Pour Point, ºC, not above

-25