Choose weight
Oil MGE-46V (TU 38 001347-83) for hydrostatic drive is produced on the basis of industrial oils with antioxidant, anti-wear, depressor and antifoam additives. The oil has a high stability of operational (viscosity, anti-wear, antioxidant) properties, not aggressive towards materials used in the hydraulic transmission. It is intended for hydraulic systems (hydrostatic drive) of agricultural, road construction and other special equipment operating at a pressure of up to 35 mPa with a short-term increase of up to 42 mPa. It is recommended to use in the aggregates with hydrostatic drive operating at the temperature range from -10 to +80 ° C. The operational life in hydraulic drives with axial-piston machines reaches 2500 h.
1 MPa ≡ 10.19716213 kgf / cm²
Specifications: TU U 38.001347-83, ISO VG 46, ISO 6743 HM, DIN 51524-II, HLP-46
Oil MGE-46V (TU 38 001347-83) for hydrostatic drive is produced on the basis of industrial oils with antioxidant, anti-wear, depressor and antifoam additives. The oil has a high stability of operational (viscosity, anti-wear, antioxidant) properties, not aggressive towards materials used in the hydraulic transmission. It is intended for hydraulic systems (hydrostatic drive) of agricultural, road construction and other special equipment operating at a pressure of up to 35 mPa with a short-term increase of up to 42 mPa. It is recommended to use in the aggregates with hydrostatic drive operating at the temperature range from -10 to +80 ° C. The operational life in hydraulic drives with axial-piston machines reaches 2500 h.
1 MPa ≡ 10.19716213 kgf / cm²
Specifications: TU U 38.001347-83, ISO VG 46, ISO 6743 HM, DIN 51524-II, HLP-46
TU U 38.001347-83,ISO VG 46, ISO 6743 HM, DIN 51524-II, HLP-46
Index |
Norm |
Kinematic viscosity at 100°C, mm2/s at 50°C at 40°C |
no less than 6.0
41.4-50.6
|
Viscosity Index, not less than |
90 |
Density at 20°C, kg/m3, not more than |
890 |
Flash Point in the open crucible, ºC, not lower than |
190 |
Pour Point, ºC, not above |
minus 30 |
TU U 38.001347-83,ISO VG 46, ISO 6743 HM, DIN 51524-II, HLP-46
Index |
Norm |
Kinematic viscosity at 100°C, mm2/s at 50°C at 40°C |
no less than 6.0
41.4-50.6
|
Viscosity Index, not less than |
90 |
Density at 20°C, kg/m3, not more than |
890 |
Flash Point in the open crucible, ºC, not lower than |
190 |
Pour Point, ºC, not above |
minus 30 |