Industrial oil I-30A

loading
loading
loading
loading
loading
loading
loading
loading

Choose weight

Distillate oil or a mixture of distillate with a residual of sulphurous and low-sulfur oils of selective purification. 

It is used for lubricating light and medium-loaded gears, rolling and sliding guides of machines, acting as working fluids in hydraulic systems of machine tools, automatic lines, presses, for construction, road and other machines operating in the open air.

Using of I-30A and other oils of this range is possible in units and aggregates of mechanisms, where special oils are not required.

Distillate oil or a mixture of distillate with a residual of sulphurous and low-sulfur oils of selective purification. 

It is used for lubricating light and medium-loaded gears, rolling and sliding guides of machines, acting as working fluids in hydraulic systems of machine tools, automatic lines, presses, for construction, road and other machines operating in the open air.

Using of I-30A and other oils of this range is possible in units and aggregates of mechanisms, where special oils are not required.

Physicochemical characteristics

 

Index

Norm

Kinematic viscosity at 100°C, mm2/s

at 50°C

at 40°C

 

 

41-51

Viscosity Index, not less than

Density at 20°C, kg/m3, not more than

890

Flash Point in the open crucible, ºC, not lower than

200

Pour Point, ºC, not above

minus 15

 

 

Index

Norm

Kinematic viscosity at 100°C, mm2/s

at 50°C

at 40°C

 

 

41-51

Viscosity Index, not less than

Density at 20°C, kg/m3, not more than

890

Flash Point in the open crucible, ºC, not lower than

200

Pour Point, ºC, not above

minus 15